Введение в фибероптику
Оптоволоконный кабель Avantes B.V. – основные параметры
Устойчивость к соляризации
Оптоволоконный кабель – защитное покрытие
Оптоволоконный коннектор
| |
1/2" промышленный флюориметрический датчик
техническая спецификация
Fibers Illumination
|
12 fibers of 200µm, UV/VIS
|
Fibers Detection
|
1 fiber 600µm
|
Wavelength Range
|
200-800 nm (UV/VIS) or 350-2000 nm (VIS/NIR)
|
Connector
|
2 x SMA 905
|
Probe End
|
Stainless steel cylinder, 128 mm long x 12,7 mm (1/2") diameter. The probe end contains a ca. 10 mm diam. x 1 mm thick sapphire window with anti-reflection coating. The probe tip is exchangeable and waterproof
|
Fluorescence Accesory
|
See drawing below
|
Tubing
|
The optical fibers are protected by a silicon inner tube and a flexible chrome plated brass outer tubing. The tubing also gives stress relief. OD: 5,0 mm Optionally a waterproof, steel reinforced, silicon tubing can be provided
|
Temperature
|
-30ºC to 100ºC. (High Temperature Probes available on request)
|
Bending
|
Minimum bend radius: Short term (few seconds) 60 mm, long term: 180 mm
|
Описание продукта
Информация для заказа
|